Pure Sine Wave Inverter

RN-PV Series 1000W to 12KW Pure Sine Wave Inverter

Key features vSmart remote control (RMT) vBatterytemperature sensor (BTS) vAutomatic generator starting (AGS) vSupport solar panel with MPPT function vDesigned to operate under harsh environment vDC start automatic self-diagnostic function
Key features
1. Smart remote control (RMT)
2. Battery temperature sensor (BTS)
3. Automatic generator starting (AGS)
4. Support solar panel with MPPT function
5. Designed to operate under harsh environment
6. DC start & automatic self-diagnostic function
7. Compatible with both linear & non-linear load
8. Easy to install & easy to operate & easy to solve
9. Low DC voltage supports home & office appliances
11. Powerful charge rate up to 120Amp, selectable from 0%-100%
12.  High efficiency design & “Power Saving Mode” to conserve energy
13. Battery priority mode, designates inverter-preferred UPS configuration
14. 13 VDC battery recover point, dedicated for renewable energy systems
15. 8 pre set battery type selector plus de-sulphation for totally flat batteries
16. 4-step intelligent battery charging, PFC (power factor correction) for charger
17. 8ms typical transfer time between utility & battery, guarantees power continuity
18. 15s delay before transfer when AC resumes, protection for load when used with generator
Technical specifications:
Item Model 1.0KW 1.5KW 2.0KW 3.0KW 4.0KW 5.0KW 6.0KW 8.0KW 10.0KW 12.0KW
Inverter output Continuous output power 1.0KW 1.5KW 2.0KW 3.0KW 4.0KW 5.0KW 6.0KW 8.0KW 10.0KW 12.0KW
Surge rating(20ms) 3.0KW 4.5KW 6.0KW 9.0KW 12.0KW 15.0KW 18.0KW 24.0KW 30.0KW 36.0KW
Output waveform Pure sine wave/same as input(bypass mode)
Nominal efficiency >88%(peak)
Line mode efficiency >95%
Power factor 0.9-1.0
Nominal output voltage rms 100-110-120VAC/220-230-240VAC
Output voltage regulation ±10% rms
Output frequency 50Hz ± 0.3Hz/60Hz ± 0.3Hz
Short circuit protection Yes(1s after fault )
Typical transfer time 10ms(Max)
THD < 10%
DC input Nominal input voltage 12.0VDC/24.0VDC/48.0VDC 24.0VDC/48.0VDC 48.0VDC
Minimum start voltage 10.0VDC/10.5VDC for 12VDC mode *2 for 24VDC, *4 for 48VDC;
Low battery alarm 10.5VDC/11.0VDC for 12VDC mode
Low battery trip 10.0VDC/10.5VDC for 12VDC mode
High voltage alarm 16.0VDC for 12VDC mode
Low battery voltage recover 15.5VDC for 12VDC mode
Idle consumption-search mode < 25W when power saver on(refer to table )
Charger Output voltage Depends on battery type(refer to Table 2.5.2)
Charger breaker rating 10A 15A 20A 20A 20A 30A 30A 40A 40A 40A
Max charge power rate 1/3 rating power(refer to Table 2.5.3)
Battery initial voltage for start 10-15.7VDC for 12VDC mode *2 for 24VDC, *4 for 48VDC;
Over charge protection S.D. 15.7VDC for 12VDC mode
BTS Battery temperature sensor
 Yes(refer to the table)
Variances in charging voltage & S.D voltage base on the battery temperature
Bypass & protection Input voltage waveform Sine wave(grid or generator)
Nominal voltage 110VAC 120VAC 220VAC 230VAC 230VAC
Max input AC voltage 150VAC for 120VAC LV mode; 300VAC for 230VAC HV mode
Nominal input frequency 50Hz or 60Hz
Low frequency trip 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
High frequency trip 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
Overload protection(SMPS load) Circuit breaker
Output short circuit protection Circuit breaker
Bypass breaker rating 10A 15A 20A 30A 40A 40A 40A 50A 63A 63A
Transfer switch rating 30 Amp for UL & TUV 40 Amp for UL 80 Amp for UL
Bypass without battery connected Yes(optional)
Max bypass current 30 Amp 40 Amp 80 Amp
Solar Charger
Rated voltage 12VDC/24VDC/48VDC
Solar input voltage range 15-30VDC/30-55VDC/55-100VDC
Rated charge current 40~60A
Rated output current 15A
Self consumption < 10mA
Bulk charge(default) 14.5VDC for 12VDC mode ( *2 for 24VDC, *4 for 48VDC)
Floating charge(default) 13.5VDC for 12VDC mode
Equalization charge(default) 14.0VDC for 12VDC mode
Over charge disconnection 14.8VDC for 12VDC mode
Over charge recovery 13.6VDC for 12VDC mode
Over discharge disconnection 10.8VDC for 12VDC mode
Over discharge reconnection 12.3VDC for 12VDC mode
Temperature compensation 13.2mV/ for 12VDC mode
Ambient temperature 0~40(full load), 40~60(derating)
Mechanical specifications Mounting Wall mount
Inverter dimensions(L*W*H) 388*415*200mm 488*415*200mm 588*415*200mm
Inverter weight(solar charger)Kg 21+2.5 22+2.5 23+2.5 27+2.5 38+2.5 48+2.5 49+2.5 60+2.5 66+2.5 70+2.5
Shipping dimensions(L*W*H) 550*520*310mm 650*520*310mm 750*520*310mm
Shipping weight(solar charger)Kg 23+2.5 24+2.5 25+2.5 29+2.5 40+2.5 50+2.5 51+2.5 62+2.5 68+2.5 72+2.5
Display Status LED/status LED+LCD
Standard warranty 2 years(optional)