| General specifications: | ||||||
| Input wave form: | Sine wave(Utility or generator) | |||||
| Nominal voltage: | 120VAC | 230VAC | ||||
| Low voltage trip: | 80V/90V+/-4% | 184V/154V+/4%- | ||||
| Low voltage re engage: | 90V/100V+/-4% | 196V/164+/-4% | ||||
| High voltage trip: | 140V+/-4% | 253V+/-4% | ||||
| High voltage re engage: | 135V+/-4% | 243V+/-4% | ||||
| Max input AC voltage: | 150VAC | 270VAC | ||||
| Nominal input frequency: | 50Hz or 60Hz(Auto detect) | |||||
| Low frequency trip: | 47Hz for 50Hz, 57Hz for 60Hz | |||||
| High frequency trip: | 55Hz for 50Hz, 65Hz for 60Hz | |||||
| Output wave form: | (Bypass mode) same as input | |||||
| Overload protection: | Circuit breaker | |||||
| Short circuit protection: | Circuit breaker | |||||
| Transfer switch rating: | 30 amp or 40 amp | |||||
| Efficiency on line transfer mode: | 95%+ | |||||
| Line transfer time: | 10 ms typical | |||||
| Bypass without battery connected: | Yes | |||||
| Max bypass current: | 30 amp or 40 amp | |||||
| Bypass over load current: | 35 amp or 45 amp: alarm | |||||
| Inverter specification/output | ||||||
| Output wave form: | Pure sine wave | |||||
| Output continuous power watts: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| Output continuous power VA: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| Power factor: | 0.9-1.0 | |||||
| Nominal output voltage rms: | 120/230VAC | |||||
| Output voltage regulation: | +-/10% rms | |||||
| Output frequency: | 50Hz+/-0.3Hz or 60Hz+/-0.3Hz | |||||
| Nominal efficiency: | >88% | |||||
| Surge ratings: | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 |
| Short circuit protection: | Yes, fault after 1 sec | |||||
| THD | <10% | |||||
| Inverter specification/input: | ||||||
| Nominal input voltage: | 12.0V | 24.0V | 48.0V | |||
| Minimum start voltage: | 10.0V | 20.0V | 40.0V | |||
| Low battery alarm: | 10.5V/11.0V | 21V/22.0V | 42.0/44.0V | |||
| Low battery trip: | 10.0V/10.5V | 20.0V/21V | 40.0V/42V | |||
| High voltage alarm: | 16.0V | 32.0V | 64.0V | |||
| Low battery voltage recover | 15.5V | 31.0V | 62.0V | |||
| Power saver: | Below 25 watts when enabled | |||||
| Power saver: | Same switched on/off on remote | |||||
| Charger mode specifications: | ||||||
| Input voltage range: | 90-135VAC | 194-243VAC/164-243VAC(W) | ||||
| Output voltage: | Dependent on battery type | |||||
| Max charger current: | 35A/70A (Charger current controller) | |||||
| Battery initial voltage for start up: | 10-15.7V for 12V(*2 for 24V; *4 for 48V) | |||||
| Over charger protection shutdown: | 15.7V for 12V(*2 for 24V; *4 for 48V) | |||||
| Charger curves (4 stage constant current) battery types | ||||||
| 4 steps digital controlled progressive charge | ||||||
| Battery type: | Fast V | Float V(*2 for 24V; *4 for 48V) | ||||
| GEL U.S.A. | 14.0 | 13.7 | ||||
| A.G.M. 1 | 14.1 | 13.4 | ||||
| A.G.M. 2 | 14.6 | 13.7 | ||||
| Sealed lead acid | 14.4 | 13.6 | ||||
| GEL Euro | 14.4 | 13.8 | ||||
| Open lead acid | 14.8 | 13.3 | ||||
| Calcium | 15.1 | 13.6 | ||||
| De-sulphation | 15.5 for 4 hrs | |||||
| Remote control/RS232/USB | Yes, optional | |||||
| Mounting | Wall mount | |||||
| Size: in mm | 1000 model: 520*315*300 mm3 | |||||
| 2000/3000 model: 580*315*300 mm3 | ||||||
| 4000/5000/6000 model: 740*315*300 mm3 | ||||||
| Gross weight: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| 20Kg | 22Kg | 26Kg | 37Kg | 47Kg | 47Kg | |
